Desiccant Air Dryers

In heavy-duty industrial operations, water vapor in compressed air equipment can lead to premature failure, corrosion, frozen air lines, quality control issues and a range of other operational problems. CKG offers solution to this concerns with the offering on rent of Desiccant Air Dryer System purifies compressed air by absorbing moisture. You can find these systems in any industrial application in which reliable equipment and exceptional quality control is necessary.

Available to be Used for Onshore and Offshore Applications

Data Sheet:

×

General Details

Desiccant-based air dryers have capacities up to 5,400cfm with dew points as low as -100°F (-40°C). The units come equipped with mounted particulate and oil-removal prefilters, automatic condensate drains, and an after filter that cleans outlet air down to .01 micron Desiccant-based air dryers has been engineered to ensure optimal performance and efficiency in a range of different applications while keeping downtime to a minimum.

Features
  • Rated at -40’C dew point
  • Rugged design for Oil and Gas Industry.
  • Mounted Pre-Filter with DP gauge to protect desiccant bed from oil and particular contamination.
  • Mounted after-Filter with DP gauge to remove dust and desiccant fines from final air system.
  • Premium grade desiccant beads offer enhanced surface area and high crush strength which prolongs bed life.
  • Large desiccant beds ensure 4.8 seconds of contact time.. allows wet, saturated air at the dryer inlet to be dried to the required dew point.
  • 30% extra desiccant provided to compensate for natural bed aging.. ensures top performance over expected 3 to 5 years of desiccant bed life.
  • Large flow diffusers ensure even flow distribution through the bed and eliminate channeling.
  • Towers are sized so that air velocity through the bed won’t fluidize the desiccant which prevents bed movement and desiccant dusting.
  • Up-flow drying allows water and heavy contaminants to drop out of the air stream as they enter a tower which protects the bed from contamination. This makes it simple to discharge the contaminants when the tower depressurizes.
  • Cleanable stainless steel flow diffusers/support screens and separate fill and drain ports for ease of desiccant replacement.